• plastic floor shredder, SPC floor shredder, PVC floor shredder, WPC floor shredder, wood plastic floor shredder, waste plastic shredder

Waste SPC PVC WPC Wood Plastic Floor Shredder Machine

Waste SPC PVC WPC Wood Floor Plastic Floor Shredder Machine can shred waste SPC floor, PVC floor, plastic floor, WPC floor, wood floor. The motor drives the shaft to make knife rotates in high speed, the material are put to between the knife shaft and fixed knife, the materials are shredder, the qualified size will discharge from the screen mesh, the oversize material will be send back for re shredding. The final product size can be adjusted by changing the final product size.

  • Product Description
  • Technical Parameters
  • Video

Plastic Floor Shredder Application Areas:

Plastic Floor Shredder Machine can shred waste SPC floor, PVC floor, plastic floor, WPC floor, wood floor.

Plastic Floor Shredder Machine Description:

Single shaft plastic floor shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small size. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head is consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on single shaft. The fixed cutter is mounted at an angle adjacent to rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reducing of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.

Plastic Floor Shredder  Blade:

Single Shaft Shredder shaped blade

Plastic Floor Shredder Machine Working principle:

The motor drives the shaft to make the knife rotates at high speed, the plastic floor is put between the knife shaft and fixed knife, the materials are shredder, the qualified size will discharge from the screen mesh, and the oversize material will be sent back for re-shredding. The final product size can be adjusted by changing the final product size.

 

Plastic Floor Shredder Machine Components:

single shaft shredder pusher system Heat treated rotor knives
Pusher System
Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components.
Heat treated rotor knives
Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design Wear Resistant Tungsten surface coating
V-cutting rotor design
with staggered cutter positioning
Wear Resistant
Tungsten surface coating for abrasive applications
Easy operation Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation Screen Unit
Electronic Control
Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation
Screen Unit
Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance.
 PLC control Hydraulic Station
PLC control
Making it easier for fault diagnosis and maintenance
Hydraulic Station
The pressure and rate of flow can be adjusted according to different materials.

Waste SPC PVC WPC Wood Plastic Floor Shredder Machine Technical Features:

1. The plastic floor shredder single shaft for plastic with the big feeding mouth, it can put the big plastic or rubber product freely.
2. The rotary and cutting blade with an edge of a special design, can get very high efficiency and high capacity.
3. The plastic floor shredder single shaft for plastic is controlled by a PLC system; the blade can rotate in opposite direction and close automatically if something unexpected happens; with very high safety service.
4. The plastic floor shredder single shaft for plastic runs slowly with low noise and is less dusty.
5.  Plastic floor shredder blade material with special alloy steel made, with long life.
6. All the machinery and electrical devices are protected in accordance with the European CE standard.
7. Hydraulic system Pushes the material automatically to the shredding rotor while working. More efficient and can achieve a high capacity. According to material kind, can adjust the pushing speed to avoid overload.
8. Cooler system(optional) can maintain the temperature for continuous operation.

Related equipment:

 

Leave a Reply

Your email address will not be published. Required fields are marked *

single shaft shredder, plastic shredder, plastic pipe shredder, wood shredder, cable shredder

Model PNDS-600A PNDS-800A PNDS-1000A PNDS-1200A PNDS-1500A
Dimension L*W*H(mm) 2455×1478×1700 2825×1747×1875 2825×2004×1875 2825×2564×1875 2825×2964×1935
Cutting Chamber C/D(mm) 1200×600 1410×800 1410×1000 1410×1200 1410×1500
Main Powerkw) 15-22 30-45 37-55 55-90 75-132
Hydraulic Power(kw) 2,2 3 4 5.5 5.5
Shredding Diameter(mm) 320 400 400 400 480
Shredding Rotor Length(mm) 600 800 1000 1200 1500
Rotating&Fixing Blades QTY(psc) 32+2×2 38+2×2 58+2×2 95+2×3 110+2×3
End Plastic Scraps Size(mm) 30-50 30-50 30-50 30-50 30-50

Video

Products List