• mixing equipment, pvc powder mixer, high speed powder mixer, vertical powder mixer, powder mixing machine price

1000L Vertical PE PVC Plastic Powder Mixing Equipment

Features :
1. Mixed materials are made by negative pressure mixed principle
2. The electrical instruments are all well-known imported appliances with PLC programmable control
3. The high degree of automation and speed mixing
4. The blade was made by stainless steel pressure and passed the static and dynamic balance test
5. Especially the coolant blade used abroad advanced spiral mixing structure, the whole container has no dead angle, cooling speed and discharging clean.
6. Large-volume
7. The PVC mixer is for mixing PVC powder, CACO3 and other addictives. This equipment is widely used in PVC pipe and profile production.
8. The PVC mixer is composed of high speed mixer (hot mixer), cooling mixer and control cabinet.
9. We use 6-8mm stainless steel SUS304 for the internal wall construction. It will guarantee the mixer could use for a long time under the high friction.

  • Product Description
  • Technical Parameters
  • Video

Vertical PE PVC Plastic Powder Mixing Equipment Description:
SRL-Z series PVC plastic powder mixing equipment is applicable for mixing, coloring and drying of various resins such as poly, PE, PP, PVC polypropylene, poly chloride, etc, and in the process of drying and volatilization of engineering plastics such as ABS PC, etc before forming and processing as well as in the mixing of phenolic resin.

The PVC plastic powder mixing equipment combines heat mixing and cool mixing together. The materials after heat mixing can be getting into the cool mixer for cooling automatically, exhausts remaining gass and avoid agglomerates.

PVC plastic powder mixing equipment is the ideal equipment for plastic mixing.

PVC Mixing Unit PE PVC Powder Mixer Blade

Components of  Vertical PE PVC Plastic Powder Mixing Equipment:
PVC plastic powder mixing equipment consists of seven parts: frame, transmission, pot body, lifting, discharge port and electric control box. The whole machine adopts a closed structure, which is reasonable and beautiful.

The pot body is made of stainless steel, the inner surface is extremely smooth and hard, and it has the characteristics of wear resistance, corrosion resistance, and non-sticky materials. The pot body of the mixer has a heating jacket and a resistance heating ring. The temperature is transmitted to the pot body through the high ignition point heat conduction oil in the heating jacket so that the pot body is evenly heated, and the temperature of the material in the pot can be controlled by adjusting the temperature. There is an asbestos insulation layer outside the jacket.

The lid of this series of mixers is cast from aluminum alloy. The inner surface is polished by fine turning. After it is lifted from the cylinder, it can rotate in the vertical direction and rotate horizontally clockwise (rotation at 70°C). The cover has holes for adding resin, plasticizer, stabilizer, and vents. Users can According to self-arrangement. Do not use excessive force when turning the lid to prevent damage to the pot wall. In order to prevent personal accidents caused by the failure of the lid of the pot and the rotation of the stirring blade, motor protection is specially set.

 Vertical PE PVC Plastic Powder Mixing Equipment Features :
1. Mixed materials are made by negative pressure mixed principle
2. The electrical instruments are all well-known imported appliances with PLC programmable control
3. The high degree of automation and speed mixing
4. The plastic mixer blade was made by stainless steel pressure and passed the static and dynamic balance test
5. Especially the coolant blade used abroad advanced spiral mixing structure, the whole container has no dead angle, cooling speed and discharging clean.
6. 100-1600L Large-volume
7. The PVC mixer is for mixing PVC powder, CACO3 and other addictives. This equipment is widely used in PVC pipe and profile production.
8. The PVC mixer is composed of high speed mixer (hot mixer), cooling mixer and control cabinet.
9. We use 6-8mm stainless steel SUS304 for internal wall construction. It will guarantee the mixer could use for a long time under high friction.

Related equipment:

Leave a Reply

Your email address will not be published.

Model Total volume(L) Effective volume(L) Motor power(kw) Main shaft speed(rpm) Mixed time(min) Heating method Discharge method
SRL-Z100/200 100/200 65/130 14/22/7.5 650/1300/150 8-12 Self-friction or electric heating Pneumatics
SRL-Z200/500 200/500 150/320 30/42/11 475/950/80 8-12
SRL-Z300/600 300/600 225/380 40/55/11 475/950/80 8-12
SRL-Z500/1000 500/1000 350/700 47/67/15 430/860/60 8-12
SRL-Z800/1600 800/1600 560/1100 60/90/22 370/740/50 8-12

Video

Products List