Tire Wire Drawing Machine Description:
WANROOETECH supplies tire recycling production line, Tire powder pulverizer mill for sale. At the same time, we also have professional pre-treatment machines and devices for tyre processing, such as tyre shredder, to make the pyrolysis process much easier. Before the tyre being shredded into pieces, we will need the help of a tyre wire drawing machine to get the bead wires out from the inside of the tyres.
WANROOETECH hydraulic tyre tire wire drawing machine can pull the bead wires inside of the tyres out completely for one time. It can make the following processing of waste tyres including shredding or cutting and the pyrolysis process much easier. The main parts of tire wire drawing machine is an electromotor oil pump, hook, four-bladed vane, rack, oil cylinder, hydraulic pressure stands, control handle, guide pulley, etc.

Wire Drawing Process of Waste Tires：
Firstly, the hydraulic system drives the hook to extend into the interior of the waste tire. Next, press the start button, and the steel wire is pulled out by the hook under strong tension, while the rubber peels off from the steel wire. The pull-out design effectively prevents rubber from flowing out, ensuring clean wires are obtained. This pulling process proceeds smoothly.
Subsequently, the tires were sent to the shredder for processing. The pulled steel wire is collected and used as raw material for the production of steel billets by hydraulic presses.
Tire wire drawing machines and tire shredders are often used in conjunction as integrated pre-treatment systems for waste tire recycling. For tires with a diameter exceeding 1200 millimeters, jaw cutters and larger wire drawing machines are required. Wanrooetech provides this type of equipment. Please send an email to learn more about tire drawing machines.

Tire Wire Drawing Machine Features ：
1. Compact structure. This equipment is not so big and covers a maximum area of about 5 ㎡, so it is easy to handle and can save a lot of space for the clients.
2. High efficiency. The largest capacity per hour of this machine can reach 120 pieces of waste tyres and it is very competitive on the market of like products.
3. Safety design. This tyre steel wire pulling machine has protective rack and it can protect the operator from hurting by the sharp head of the steel wire.
4.  Easy to Operate. Wanrooetech tyre wire drawing machines are fully automatic. The whole processing of the tire wire drawing machine is automatic. The operator only needs to know how to operate the control system.
5. Smooth and complete separation of steel wire and rubber tires. We make sure you get clean steel wires from the tyres without any rubbers or impurities stuck on them.

Video