Plastic Lumps Recycling Machine

Plastic lumps recycling machine can treat with PP PE HDPE PVC ABS plastic lumps, blow molding, compression molding, extrusion molding, injection molding, etc waste. The whole process includes shredding and crushing system. The whole line just need 3-4 man to operate. With over 20 years of experience in recycling, WANROOETECH not only mastered the key technology but also improved machine designs to address specific product features. WANROOETECH offers plastic lump recycling solutions that are high output and low energy consumption.

Plastic lumps recycling machine

What are plastic lumps?

plastic lumps, which are usually generated as a waste product during the extrusion of plastics. The economic potential of this “purge” is enormous. It is expensive to dispose of the unused purge lumps. Recycling offers the possibility of seamlessly reintegrating production scrap into the manufacturing process instead of using new resources.

waste plastic lumps

Why are we recycling plastic lumps?

During injection molding production, there are often production waste and scrap. These occur primarily when molded parts do not meet the desired specifications, edge trims have to be made or injection molded parts are cast on. Moreover, plastic waste also occurs during production breaks, machine tests or in the start-up phases of the machines. If the waste material is pure, it can be returned to production on site. The recycling of start-up lumps reduces the amount of waste and thus effectively reduces the impact on the environment and on disposal costs.

 

How to recycling plastic lumps?

This waste molding plastic usually is in very solid and hard pieces, so shredding or crushing is the initial recycling process of these molding plastic scraps. For large molding plastic scraps (purgings), it is usually shredded by a single-rotor/shaft shredder – actually the purgings are shaved into plastic flakes by the high-speed cutting rotor of the single shaft shredder. For small molding scraps, it can be directly granulated by small-sized min granulator. After shredding or granulating, this scrap molding plastic is then turned into regrind. Regrind is usually mixed with virgin compound at a predetermined percentage for remolding. Using regrind is a great way to reduce cost, optimize material usage, and reduce demand for natural resources.

 

Plastic lumps recycling machine process:

In order to optimally prepare plastic waste for extrusion lines, it must be shredded to the smallest possible particle size. Usually, this is done in a two-stage process, consisting of a pre-shredder and a post-shredder, which are connected to each other with conveyor technology (conveyor belt or screw conveyor).
While the pre-shredder shreds the plastic to a size of approx. 20-60 mm, the granulator grinds the material to approx. 3-12 mm.

Swing arm shredder machine → L shaped conveyor belt →  crusher →  hopper

Plastic lumps shredder: used for recycling PE PP PVC PET PS ABS lumps, waste plastic pipes, plastic bottles, plastic baskets, plastic shells of household appliances (e.g. TV, computer, refrigerator, washer machine, etc), plastic boards and so on.

Crusher: plastic lumps can be crushed, then get 3-12mm plastic scraps;

Wanrooetech provides plastic lumps recycling machine, according to your recycling waste plastic lumps, provides customized recycling services to meet your different needs, we will help you save investment costs and labor costs, and we have professional engineers one-on-one to help you solve your questions, contact us now!

 

If you want more information, quotation, please leave us a message! when sending the inquiry, please describe your parameters or technical requirements (such as processing materials, output size, capacity, etc.)

Leave a Reply

Your email address will not be published.