HDPE pipe recycling machine can recycling waste HDPE pipe. Wanrooetech provides a complete HDPE pipe recycling solution, including design, installation, training and unmatched lifetime service and support. Our engineers learn your business, analyze your needs and recommend equipment and systems optimized for your facility and business goals.

 

With 25 years of experience in recycling, Wanrooe not only mastered the key technology but also improved machine designs to address specific product features. Wanrooe offers HDPE pipe recycling machine that is high output and low energy consumption.

 

Why do we need to recycling HDPE pipe?
For 75+ years, it has been impossible to imagine industrial, public and private applications without plastic pipes. Concealed and usually laid underground, they transport huge quantities of resources every day – for example, wastewater and drinking water for sanitary systems, households, agriculture, and municipal sewage treatment plants. Or gas for heating systems. Plastic pipes are also regularly used as cable protection.

 

In particular, plastic pipes made of HDPE (high-density polyethylene) are considered to be especially resistant and flexible in use, which is why they are available in a wide variety of diameters and shapes. As with all goods and products, however, the question of proper disposal also arises at the end of their service life. In addition, the production of HDPE pipes regularly generates production waste, for example during extrusion. The good news is that this plastic is ideally suited for in-house recycling and must be shredded in the first step. Here, WANROOETECH can draw on decades of experience in pipe shredding.

How to recycling HDPE pipe?

 

HDPE is not biodegradable and takes very long time to break down. So it is very important that the scrap HDPE products are properly recycled and reused.
HDPE Pipe Shredder is the perfect solution for recycling giant pipes. It achieves an unprecedented move–downsizing the big plastic pipe in one step. Wanrooetech offers 4 ways to downsize plastic pipes:

 

By granulator. For small and short pipes.
By specialized pipe shredder. For large and short pipes.
By manual cutting and shredder. For small and long pipes.
By horizontal pipe shredder. For large and long pipes.

Horizontal HDPE pipe shredder

Large pipes with diameters up to 1500 mm and lengths up to 8000mm are well covered by this HDPE pipe shredder (horizontal shredder machine). A pipe is first placed on the lift seat. The lifter raises the pipe and toss it into the chamber with the help of gravity. Once the pipe is in position, the pusher is actuated to feed the pipe toward the rotor.

 

The rotor is made of hardened steel. On the surface of the rotor, there are multiple blades that are the key to shear down the pipe. The arrangement of rotary knives constantly shreds the pipe piece by piece. Thanks to the pusher, it creates close contact between the rotor and pipe.

 

The particles coming out of the HDPE Pipe Shredder are 40mm by 40mm. It is optional to add a conveyor and granulator. With these 2 machines, the large shredded particles can be downsized to 12mm regrind, which is good enough for reuse.

 

HDPE Pipe Shredder Application:
Coils
HDPE pipes
PE-HD pipes
PVC pipes
Oversize pipes (diameter from 1 to 1.5m)
Long pipes (from 1 to 6m)
Fittings and profiles

 

HDPE Pipe Crusher Machine:

 

Pipes with a smaller diameter and thin-walled can be directly broken down into 12mm regrind by a plastic crusher/granulator.

 

Long pipes are not applicable in this case as the pipes are usually loaded into the crushing chamber horizontally. A pipe too long is not possible to load. Therefore, you can choose HDPE pipe horizontal crusher/granulator. After granulation, regrind is pneumatically collected in the surge hopper.

Then HDPE crushed material can be ground by plastic pulverizing machine or made into plastic granules by HDPE pelletizer.

 

Wanrooetech provides HDPE pipe recycling machines, according to your recycling material, and provides customized recycling services to meet your different needs, we will help you save investment costs and labor costs, and we have professional engineers one-on-one to help you solve your questions, If you have chunks of HDPE pipes sitting in factories and are interested in recycling them, Please contact Wanrooe for consulting.

 

If you want more information, quotation, please leave us a message! when sending the inquiry, please describe your parameters or technical requirements (such as processing materials, output size, capacity, etc.)