• hot mixer machine, plastic material mixer machine, plastic mixing equipment, mixer pvc, pe mixer

PVC PE Hot Mixer Machine Plastic Mixing Equipment

Features :
1. The pot cover has applied double sealing.
2. It has applied self friction and electrical heating methods.
3. Discharging of material includes two types, temperature automatic control and manual control.
4. The blade is made of whole cast stainless steel and passed dynamic and motionless balance tests.
5. Electrical control has applied famous brands (optional) parts.

  • Product Description
  • Technical Parameters
  • Video

PVC PE Hot Mixer Machine Plastic Mixing Equipment Description:
High Speed PVC PE Hot Mixer Machine guarantees the pre-dispersion of small quantities of organic and inorganic pigments on polymer base. It gives the possibility to mix both cold (with low tip speed) and hot (with high tip speed) to get full mixing of the components.
Production range from 10 lts up to 2000 lts capacity to reach output from 300kg/h up to 5000kg/h.
SHR series high-speed PVC mixer adopts advanced design and can be operated easily. safely and reliably. They have small size, light, weight high efficiency, low energy consumption and low noise. It is an ideal choice for you to buy such devices.

PVC PE Hot Mixer Machine Plastic Mixing Equipment Features :
1. The pot cover has applied double sealing.
2. It has applied self friction and electrical heating methods.
3. Discharging of material includes two types, temperature automatic control and manual control.
4. The blade is made of whole cast stainless steel and passed dynamic and motionless balance tests.
5. Electrical control has applied famous brands (optional) parts.

PVC PE Hot Mixer Machine Plastic Mixing Equipment Application:
Plastic industry
Rubber industry
Pharmacy
Dye industry
Compounding industry
Extrusion industry
Plastic processing factory
Chemical industry

Materials that can be processed by High Speed Hot Mixer Machine:
PVC, WPC powder, PP, HDPE, LDPE, LLDPE, TPV, EVA, ABS, PS resin, Rubbers, pigments, etc.

PVC PE Hot Mixer Machine Plastic Mixing Equipment Decisive advantages:
All important parts (bowl, mixing tool, electrical control) are manufactured in AUDOP Company, which ensure the quality of machine.
All material in contact with the product is SS304 or aluminum alloy and the product will not be contaminated.
Short mixing time, easy and convenient to clean high output.
Mixing tool coated with wear-resistant material, which can increase service life and past dynamic and balance test, running smoothly.
Mature product technology based on mixing blade with high tip speed (up to 40m/sec).
High throughput rate at low, specific energy consumption.
Rapid, perfect after-sales service.

Integrant:
Bowl:
All material in contact with the product is in SS304.Heat insulation with highly polished. No product will remain.

Lid:
All material in contact with the product is in SS304.With highly polished inside walls. Have well self-cleaning. Dust-proof sealing. With liquid material feeding hole and manual feeding hole which are convenient or connect.

Mixing tool:
3 or 4 layers casting SS304.There is no dead corner region during mixing and can achieve the best mix. Tool’s interval adjustable, wrong blade can be replaced individually. Surface areas are provided with wear-resistant coating and can increase working lifetime.

Shaft bearing & sealing:
Labyrinth with purging air sealing plus oil sealing to ensure the material will not leak out. Bushing surface with hard treatment, and no wear and tear. After replacing oil sealing. The sealing performance is the same as the new one.

Shaft bearing:
Two independent self-centering bearing support by the upper and lower side of V-belt wheel to eliminate the bending phenomenon of shaft during belt tension. Bearing lubricated by grease.

Temperature measurement:
Thermo-sensor PT100, with analog signal (4~20mA) Transmitter for remote temperature indication and central control of mixing system. Probe with antiwear coating, the service life is long. PTEE sleeve for heat insulation installed on the wall of the container. Two sensors, one for discharge control another one for overheat protection.

Driving motor:
Drive by ABB frequency inverter, the speed of shaft to be adjustable.

Lid open device:
Open and handle by Pneumatic cylinder or handwheel, safe and reliable. Lid can be opened even with no electric power and compressed air supply.

Discharge plate:
Large size discharge plate, the speed of discharge material is quick. Fitted exactly to the bottom dish with no dead corner. Driven with a pneumatic cylinder, flexible and reliable. Hinged type design for easy access and cleaning.

Related equipment:

Leave a Reply

Your email address will not be published.

Model/Specs SHR-100A SHR-200A SHR-300A SHR-500A SHR-800A SHR-1000A
Total Cubage (L) 100 200 300 500 800 1000
Effective Cubage (L) 75 150 225 375 600 750
Discharging Mode Pneumatic
Heating Mode Self-friction/electric heating
Mixed Speed(r/min) 650/1300 500/1000 475/950 430/860 60/660 60/660
Motor Powder(KW) 14/22 30/42 40/55 55/75 110 160

 

Video

Products List