PP PS PVC Waste Plastic Compactor Agglomerator Application Areas:
PP PS PVC Waste Plastic Compactor Agglomerator Machine is used to agglomerate the plastic scrap such as wet or dry recycling plastic films, PET fiber, woven bags, Soft PVC, LDPE, HDPE, PS, PP, foam PS, PET fibers and other thermoplastics, etc.

PP PS PVC Waste Plastic Compactor Agglomerator Description:
The agglomerator (plastic film granulator) is a kind of waste thermoplastic thin film, and wall thickness is less than 2 mm of products can be granulated immediately. It can be wastes or thin film of soft polyvinyl chloride (PVC), high and low-pressure polyethylene, polypropylene and polystyrene, other thermoplastic plastic on aggregate, also on foaming polystyrene abandoned products for granulation.

PP PS PVC Waste Plastic Compactor Agglomerator Working principle:
Putting the waste into the machine pot body makes the material be quickly cut by the high speed rotating turn the blade and the fixed blade shear, then the material along the pot body wall by the knife dish centrifugal force function, at the same time, the material turning up and down by paddle and from all around to move towards to the center of the pot body. The friction of the material itself and friction of pot wall and blades produce much friction heat under the high speed, making the temperature of the material rises to the half-plastic condition and connect to a small lump.

Before the materials will block, advanced preparation quantitative water will all sprayed to the material. The cold water that touches the hot materials will gasify and take out the surface heat soon, making the surface of the materials cool quickly and avoid blocking, then after the crushing effect between the rotary blade and fixed blade to cut into particles(irregular size materials). During the crushing, Also may join the appropriate color pigments according to needs.

PP PS PVC Waste Plastic Agglomerator Components：

Stainless Steel Material Material contact parts are used 304 stainless steel, welding fine polished smooth, easy to clean.	Arc Barrel Bottom The arc design of the bottom of the barrel ensures no dead angle in stirring and no residue in discharging.
External Insulation of Barrel The barrel is covered with heat insulation layer to reduce heat loss and protect the operator’s safety.	Motor The motor adopts Siemens, Wanan and other domestic brands of pure copper motor, with stable and reliable quality, and can be customized according to requirements.
Forced Oil Pump System Forced oil pump system for agglomerator bearing, which can cool bearing and also forced lubricated bearing. Except PNAG-100.	Electronic Control The whole model adopts frequency conversion control and conforms to international standards such as CE/CSA.
Metal Detector(Optional ) Ferrous metal permanent magnetic belt or metal detector can prevent metal specials from entering the agglomerator and effectively protect the blades of the agglomerator.	Conveyor (Optional) The plastic is conveyed to the agglomerator through the belt feeding device. The conveying speed is linked to the fullness of the agglomerator and the speed of the conveyor belt is automatically adjusted according to the current of the agglomerator.

PP PS PVC Waste Plastic Agglomerator Features:
1. The agglomerator machine integrates crushing, mixing and coloring can be carried out at one time.
2. The agglomerator machine covers a small area.
3. simple mechanical structure, easy to operate.
4. Adjustable blade gap, easy-to-change knives.
5. High production efficiency and low energy consumption.
6. Basically no damage to the molecular structure of the raw material and no damage to the physical properties.

Related equipment:

Video