• PP PE Plastic Film Pelletizing Machine,Plastic film pelletizer,PP/PE film granulating machine,Water Ring Pelletizer,Water Ring Pelletizing System

PP PE Plastic Film Pelletizing Line

PP PE Plastic Film Pelletizing Line Benefits:
Uniform polymer flow to die plate
Lower inlet pressure = increased rates
Rapid blade and die plate removal
Fast color changes
Easy clean-out
Simple start-up and operation
Improved pellet dryness
Easy dryer access and clean ability
Insensitive to process variations

  • Product Description
  • Technical Parameters
  • Video

General Specifications:
WANROOETECH recycling technology for processing films, fibers, and washed post-consumer waste from materials such as PE, PP, PA und PS. This line is suited to all polyolefin’s and technical plastics and is ideal for processing hygroscopic, moist, and/or pre-ground materials. The PNHS basic line is equipped with an agglomerator drum tangentially mounted at the extruder. In the agglomerator, the material is collected, cut, dried, and thermally compacted. A knife disk at the bottom of the drum, rotating at high speed, cuts the material. Heat from the cutting process and friction dries the material and raise the temperature to just under melting point. The rate of material feeding is controlled automatically by the load on the agglomerator motor, and the compacted material is fed continuously to the extruder. The machine is designed so that overloading and under loading are avoided. The PNHS basic series comprises five machine sizes which together cover an output range of 80 – 600 kg/h. Each machine can be equipped with degassing, high vacuum, full auto non-stop screen changer (filter) and any one of three pelletizing system.

PP PE Plastic Film Pelletizing Machine,Plastic film pelletizer,PP/PE film granulating machine,Water Ring Pelletizer,Water Ring Pelletizing System

Hot Die Water Ring Description
WANROOETECH water ring pelletizer connects directly to the end of the extruder, WANROOETECH screen Changer or Melt Pump via a short coupled adapter allowing polymer to flow horizontally from the extruder to the in-line die plate.
The theologically optimized design minimizes polymer inventory between the extruder and die plate and evenly distributes polymer flow to each die plate hole.
The result is a consistently uniform pellet.
Reclaim, master batch, and compounders will benefit by improved pellet quality during both short and extended production runs.
The in-line design reduces inlet pressures which can allow for increased production rates. Polymer purges quickly through the in -line die plate for quick color changes, which maximize production time. The retractable cutter head allows quick access to change blades and remove die plates for cleaning or screw removal.
An open trough cooling system allows easy operator response to process changes.
A new cylindrical pellet dryer provides improved 360° access to dryer rotor for cleaning and pellet removal. Pellet flow through the dryer is streamlined to eliminate pellet stagnation and promote efficient pellet drying. An integral dryer blower exchanges dryer air 50 times per minute to provide improved pellet dryness.

PP PE Plastic Film Pelletizing Machine,Plastic film pelletizer,PP/PE film granulating machine,Water Ring Pelletizer,Water Ring Pelletizing System

Benefits:
Uniform polymer flow to die plate
Lower inlet pressure = increased rates
Rapid blade and die plate removal
Fast color changes
Easy clean-out
Simple start-up and operation
Improved pellet dryness
Easy dryer access and clean ability
Insensitive to process variations

Features:
In-line cutter geometry
Retractable cutter head design
Open water trough
New cylindrical pellet dryer
Integral dryer blower
Fully interlocked control system
Independent pellet cut

Model Production(kg/hr) Screw Diameter(mm) Main motor(KW)
PNHS-80 80-150 80 55
PNHS-100 200-250 100 90
PNHS-120 400-450 120 132
PNHS-150 450-500 150 160
PNHS-160 450-600 160 200

Video

Products List