Woven Bag Plastic Squeezing Machine Application:
Plastic squeezer is used for dewatering drying and pelletizing washed PE LDPE HDPE PVC film/ PP woven bags. After the squeezer, the final product is small plastic pellet(the moisture ≤1%) that can be put into the extruder directly. Plastic squeezer machine saves 3 machines after washing line compare with the traditional recycling line. Save one dewatering machine, one drying system, and one agglomerator. So plastic squeezing machine is an economical and necessary machine for the PP PE recycling pelletizing line. it’s equipped with an advanced screw extrusion system, squeezing efficiency could reach 95%. Also can work on the accordance with plastic washing line and plastic pelletizing line with stable capacity and whole process automation.
1. LDPE waste film recycling and washing line
2. PE agriculture using films crushing and washing line
3. Waste PE film recycling line
4. Ethylene ground film washing, drying and granulating line
5. Waste film recycling and washing line
6. PP woven bag recycling and washing line

Woven Bag Plastic Squeezing Machine Description:  
The woven bag plastic extruder is the core equipment in the plastic film recycling line, specifically designed to process films with up to 30% humidity after washing. Through high temperature and high pressure extrusion, this machine can effectively dehydrate and compress the volume, extract the essence of plastic, remove impurities, improve the subsequent granulation efficiency and the quality of plastic particles, and achieve efficient, energy-saving and environmentally friendly plastic recycling.

Woven Bag Plastic Squeezing Machine Working process:
By plastic film squeezing dryer, the washed film can be squeezed to dehydrate water of films or fluffy stuff. The film is squeezed to become flakes or blocks. The film plastic moisture will be lowered down to 1-3%.

Woven Bag Plastic Squeezing Machine Components:

Squeeze Screw The screw is a whole round steel raw material cutting, no welding, the material selected is 38CrMoAi senior nitride steel. It has the characteristics of anti-wear and anti-fatigue, high strength, etc. After processing and forming, it is nitrided, quenched and straightened for several times.	Barrel The barrel is also cut from whole round steel without welding, and the material chosen is 38CrMoAi high grade nitride steel. It has the characteristics of anti-wear and anti-fatigue, high strength, etc. After processing and forming, it is nitrided, quenched and straightened for several times.
Bottom Leaking Groove The water generated during the squeezing process is drained from the leaking tank. Due to the particularity of the water quality, the leaking tank is mostly made of stainless steel to prevent rust and corrosion.	Gearbox Forged by heavy-duty gear material 20CrMnTi carburized steel, by hobbing and grinding gears and other processing technology bearings for thrust bearings, can fully withstand the axial load, wear-resistant smooth and low noise.
Motor The motor adopts Siemens, Wanan and other domestic brands of pure copper motor, with stable and reliable quality, and can be customized according to requirements.	Electronic Control The whole model adopts frequency conversion control and conforms to international standards such as CE/CSA.

Woven Bag Plastic Squeezing Machine Advantages:
1. Plastic squeezing machine is Wanrooe Machinery designed machine, made by the advanced Italian techniques, especially screw pressing dewatering design;
2. Plastic squeezing machine is equipped with an electric control cabinet, feeder mouth is easy to control the drying effect;
3. Plastic squeezing machine is especially for plastic film, plastic bags, woven bags, Jumbo bags. Solve the drying problem in the past.
4. Instead of the dewatering machine, hot blower in the recycling line.
5. Easy to operate, drying effect can reach 95%.

Related equipment:

Video