BOPP LDPE Agricultural Film Shredder Machine Application Areas:
Plastic film shredder machine is mainly used in all kinds of hollow or solid plastic material. The film shredder machine is suitable for PE, PP, PET, ABS, PVC and engineering plastics.
Commonly Recycled Plastics Include ABS (Acrylonitrile butadiene styrene), PVC (Polyvinyl chloride), HDPE (High-density polyethylene), LDPE (Low-density polyethylene), PET (Polyethylene terephthalate), PP (Polypropylene), Epoxy, Purgings, Film, Big Bags, Bottles, Containers, Glass Fiber, Pipes, Ropes, etc.

BOPP LDPE Agricultural Film Shredder Machine Description:
Single Shaft PP PE Plastic Film Agricultural Film Shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small sizes. It can be available for shredding a wide range of materials including plastic, wood, rubber, paper, etc. The cutter head is consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reduction of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.

 

Plastic Agricultural Film Shredder in plastic film recycling
As a matter of fact, most plastic film is polyethylene (PE) or polypropylene (PP) based and is suitable for recycling if cleaned of contamination. Shredding is a primary step in plastic film’s recycling process. The collected waste plastic films are firstly shredded into small pieces by plastic film shredder and then further washed and dried. At last, the cleaned pieces are melted down and made into new products. Most waste plastic films are turned into composite lumber, but they can also be reprocessed into small pellets or post-consumer resin, which can be used to make a variety of new products like new bags, pallets, containers, crates, etc.

 

BOPP LDPE Agricultural Film Shredder Machine Components:

Pusher System Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components.	Heat treated rotor knives Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design with staggered cutter positioning	Wear Resistant Tungsten surface coating for abrasive applications
Easy operation Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation	Screen Unit Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance.
PLC control Making it easier for fault diagnosis and maintenance	Hydraulic Station The pressure and rate of flow can be adjusted according to different materials.

 

BOPP LDPE Agricultural Film Shredder Machine Features:
1)Precisely processed combined frame made of extra-thick plates; Lange-angle, hexagon prism of power slewing axis; Big hopper with big caliber for feeding big material;
2)PLC control system with automatic overload protection and auto-reverse switch;
3)Unique hydraulic pushing system accelerates the shredding speed, for light materials particularly;
4)Each dynamic blade has four cutting edges which enable reutilization after being abraded, by rotating 90 degrees;
5)Each fixed blade has two cutting edges which enable reutilization after being abraded, by rotating 180 degrees;
6)Quiet operation at low speed;
7)Screen perforation is adjustable according to customers’ requirements;
8)The shredders can be adjusted according to customer-specific requirements for throughput volume, material to be processed, etc.

 

Related equipment:

Model	PNDS-600A	PNDS-800A	PNDS-1000A	PNDS-1200A	PNDS-1500A
Dimension L*W*H(mm)	2455×1478×1700	2825×1747×1875	2825×2004×1875	2825×2564×1875	2825×2964×1935
Cutting Chamber C/D(mm)	1200×600	1410×800	1410×1000	1410×1200	1410×1500
Main Power（kw)	15-22	30-45	37-55	55-90	75-132
Hydraulic Power(kw)	2,2	3	4	5.5	5.5
Shredding Diameter(mm)	320	400	400	400	480
Shredding Rotor Length(mm)	600	800	1000	1200	1500
Rotating&Fixing Blades QTY(psc)	32+2×2	38+2×2	58+2×2	95+2×3	110+2×3
End Plastic Scraps Size(mm)	30-50	30-50	30-50	30-50	30-50

Video