Municipal Waste MSW Garbage Shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small size. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper etc. The cutter head is consists of basic shaft and pieces of quadrangle cutter. There are four edges which are easy to change. ‘V’ shaped rotary cutters are fixed on single shaft. The fixed cutter is mounted at an angle in adjacent to rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reducing of noise are ensured by the installation of ‘V’ shape rotor knives. Also the knives are very easy to install and remove.
Municipal General Waste MSW Garbage Shredder Application Areas:
Municipal Waste MSW Garbage Shredder has been designed for a wide array of applications and industries, suitable for shredding MSW (Municipal Solid Waste), Industrial Waste, waste plastic, waste wood, waste plastic film, plastic pipe, etc. Shred treatment of municipal garbage is one of the necessary processes of garbage treatment, is the implementation of the disposal of garbage and makes it an important part of the resource project.
Waste is bulky and hard to process, sometimes it is dangerous and smelly. Government and industry efforts have attempted to minimize municipal solid waste (MSW) – otherwise known as trash or garbage – yet it still dominates the waste stream. An alternative option to a detrimental landfill is to turn this waste into energy with refuse-derived fuel (RDF) by using a solid waste shredder.
Municipal General Waste MSW Garbage Shredder Description:
Municipal Waste MSW Garbage Shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small sizes. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V-shaped rotary cutters are fixed on the single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V-shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reduction of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.
Municipal General Waste MSW Garbage Shredder Components:
Pusher System
Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components.
Heat treated rotor knives
Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design
with staggered cutter positioning
Wear Resistant
Tungsten surface coating for abrasive applications
Easy operation
Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation
Screen Unit
Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance.
PLC control
Making it easier for fault diagnosis and maintenance
Hydraulic Station
The pressure and rate of flow can be adjusted according to different materials.
Municipal General Waste MSW Garbage Shredder Features:
Save space and volume before sending material to landfill
Prepare the material for the combustion process ;
To save space and volume on means of transportation (cruises, commercial or military ships) ;
Select the waste to remove any components that may cause damage in a second treatment step;
Recover material (metal recycling, plastic);
Obtain RDF Solid recovered fuels
Process material in order to make it unrecognizable (private or secret documents, medical/hospital, laboratory and R&D waste) ;
Dispose of unsaleable defective products
Dispose of poorly packaged products to prevent theft and increase the chances of recovery;
Separate liquids from solids (destruction of packaging);
Reduce size so that transport and handling on conveyor belts, screening units, screw conveyor systems, and the overhead conveyor system are easier.
Leave a Reply