Metal Shavings Swarf Shredder Application Areas:

Metal Shavings Swarf Shredder Machine is used to recycle metal scraps, such as metal turning scrap, metal punching scrap, scrap metal cans, beverage cans, beer cans, red bull cans, metal bottles, cans, cola cans, paint buckets, iron buckets scrap tin cans, scrap iron slag, moon cake boxes, steel shavings, scrap aluminum cans, scrapped automobile scrap, waste water tanks, waste radiators, metal drum, metal barrel, tin cans and etc.

Metal Shavings Swarf Shredder Description:

The PNDS Metal Shavings Swarf Shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small sizes. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head is consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on a single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reducing of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.

Single Shaft Shredder ‘V’ shaped blade:

Metal Shavings Swarf Shredder Working principle:

The motor drives the shaft to make the knife rotates at high speed, the material is put between the knife shaft and fixed knife, the materials are shredder, the qualified size will discharge from the screen mesh, the oversize material will be sent back for re shredding. The final product size can be adjusted by changing the final product size.

Metal Shavings Swarf Shredder Components:

Movable Feeding Hopper Plastic pipes are travelling along with the movement of the hydraulic ram and thus are pushed closely to the cutting rotor for thorough and efficient shredding.	Heat treated rotor knives Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design with staggered cutter positioning	Wear Resistant Tungsten surface coating for abrasive applications
Hydraulic Ram The hydraulically operated pusher feeds the material towards the cutter automatically by load-related controls. The hydraulic system is equipped with overflow valves and volumetric flow controls, which can be both sets according to the demands of the input materials.	Screen Unit Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance.
Electric Control Cabinet The whole model adopts frequency conversion control and conforms to international standards such as CE/CSA. PLC control, Making it easier for fault diagnosis and maintenance.	Hydraulic Station The pressure and rate of flow can be adjusted according to different materials.

Technical Features:

1. The metal shavings swarf shredder with the big feeding mouth, can put the big plastic or rubber product freely.
2. The rotary and cutting blade with edge of a special design can get very high efficiency and high capacity.
3. The metal shavings swarf shredder is controlled by PLC system; the blade can rotate in opposite direction and close automatically if something unexpected happens; with very high safety service.
4. The metal shavings swarf shredder runs slowly with low noise and is less dusty.
5. The blade material with special alloy steel made, with long life.
6. All the machinery and electrical devices are protected in accordance with the European CE standard.

Model	PNDS-600A	PNDS-800A	PNDS-1000A	PNDS-1200A	PNDS-1500A
Dimension L*W*H(mm)	2455×1478×1700	2825×1747×1875	2825×2004×1875	2825×2564×1875	2825×2964×1935
Cutting Chamber C/D(mm)	1200×600	1410×800	1410×1000	1410×1200	1410×1500
Main Power（kw)	15-22	30-45	37-55	55-90	75-132
Hydraulic Power(kw)	2,2	3	4	5.5	5.5
Shredding Diameter(mm)	320	400	400	400	480
Shredding Rotor Length(mm)	600	800	1000	1200	1500
Rotating&Fixing Blades QTY(psc)	32+2×2	38+2×2	58+2×2	95+2×3	110+2×3
End Plastic Scraps Size(mm)	30-50	30-50	30-50	30-50	30-50

Video