Feature:
1. Adopt 2.2KW motor drive, low power consumption, energy-saving, and environmental protection;
2. Low-speed biaxial shredding, high torque and high efficiency, metals within 2mm thickness can also be shredded easily;
3. The working process is silent, no more than 70db during no-load, and will not cause interference to the external environment;
4. The movable knife is made of high-quality alloy steel and has a long service life;
5. The crushing particle size can be adjusted according to customer requirements;
6. Intelligent, the machine can automatically reverse when encountering a hard object card machine, and the phenomenon of jamming can be relieved by itself;
Medical Waste Shredder With Sterilizer Application Areas:
Medical Waste Shredder With Sterilizer has been designed for a wide array of applications and industries, suitable for shredding solid material such as human or animal tissue, using bandages and dressings, discarded gloves, used needles, scalpels, and lancets.
Medical Waste Shredder With Sterilizer Description:
Shredding autoclave for medical waste is newly developed and produced by our company. It is widely used in hospitals, clinics, health centers, and dentists, etc. It meets the standard of GB150-2011(Pressure Vessel)and TSG R0004-2009(Pressure Vessel Safety Rules). Shredding, sterilization, and drying can be done in one autoclave, thus avoiding the second pollution. It saves space. And can greatly reduce the costs of packaging, transportation, and burying.
Autoclave With Shredder Printers
According to the actual situation of some large domestic pharmaceutical companies, Wanrooe Machinery has specially developed a device for crushing and recycling expired medicines in warehouses. Expired medicine shredders are mainly used for the detention of expired medicines or samples in warehouses. At the same time, it is also prevented from being reused by lawless elements. The expired drug crusher is driven by a three-phase 2.2kw motor. It has low power consumption, low noise, low speed and high torque. It can easily crush drugs with packaging, whether plastic bottles, glass bottles, or metals The packaging can be broken easily and with high efficiency. The new design is safer and more reliable than the traditional crusher. The feeding port is not only equipped with a splash prevention device, but also a safety switch, which can effectively prevent personal injury caused by improper operation.
Autoclave With Shredder PLC Control System
The machine cannot work when the safety door or safety cover is open; the machine is equipped with a special receiving box, which has a large capacity and does not need to be replaced and cleaned frequently. The expired drug crusher adopts electrostatic spraying technology, which greatly improves the grade of the machine. Strong anti-rust and anti-corrosion ability; very suitable for indoor use in some large pharmaceutical companies, clinics, or hospitals.
Medical Waste Shredder With Sterilizer Process:
Medical waste into the cavity from the top of the door seal after the full top seal the door closed and locked, and the operator has to run one machine preset sound processing program, the program is run as follows:
1. Loading: Pour the medical waste into the twin-shaft shredder with sterilizer, close the door and wait for the shredding process.
2. Shredding: Gear motor drive shaft counter-rotating blade, blade material through the cut, shredded and squeezed, crushing processing; range for sterilization of the waste.
3. Vacuum: Vacuum the inner cavity of the sterilizer, enter steam operation, repeat several times (generally take three times), then vacuum again, after the pressure of the inner cavity reaches the lower limit of pulsation, the program turns into the heating stage. After this stage, the cold air exclusion rate of the inner cavity can reach more than 99% to ensure that there are no dead corners in the inner cavity and that sterilization is qualified. (The set parameters are: pulsation three times, pulsation upper and lower limits are. (The parameters can be adjusted).
4. Heating: Steam enters the inner chamber through the sterilizer sandwich and heats the waste, while the inner chamber trap opens intermittently to discharge the water produced by steam condensation. When the temperature of the inner chamber reaches the set value (generally taken as 134°C), the program moves to the sterilization phase.
5. Sterilization: After the sterilization temperature is reached and the timing starts, the temperature and pressure inside the chamber are controlled during an inlet valve in the chamber to ensure that the waste in the chamber is kept within a certain temperature range for sterilization.
6. Exhaust: The bottom outlet valve opens to discharge the water and exhaust gas in the outlet chamber, and the pressure in the chamber drops to the set value and enters the program branch drying stage.
7. Dry: The vacuum pump opens to make the inner cavity evacuate, while the sandwich maintains a certain pressure and temperature to play the role of drying, the inner cavity drying time (generally needs 12-15min, in 0-99min can be set at will) to the exhaust valve and the vacuum pump close, the return valve opens to make the inner cavity back to zero pressure. When the pressure in the inner cavity rises to -10KPa, the program turns to the end stage.
8. Uninstall: Open the door at the bottom of the material and unload the material to the material transfer car.
Medical Waste Shredder With Sterilizer Components:
Medical Waste Shredder With Sterilizer Feature:
1. Adopt a 2.2KW motor drive, low power consumption, energy-saving, and environmental protection;
2. Low-speed biaxial shredding, high torque and high efficiency, metals within 2mm thickness can also be shredded easily;
3. The working process is silent, no more than 70db during no-load, and will not cause interference to the external environment;
4. The movable knife is made of high-quality alloy steel and has a long service life;
5. The crushing particle size can be adjusted according to customer requirements;
6. Intelligent, the machine can automatically reverse when encountering a hard object card machine, and the phenomenon of jamming can be relieved by itself;
7. The operation is simple, the operator can use it simply by looking at the manual, and the maintenance cost is low;
8. Wanrooetech provides long-term technical support to customers;
Leave a Reply