Description:
Plastic granulator crusher grinder blades are blades used in the machinery of the plastic industry. The blades are widely used in injection molding, plastic particles, waste plastic recycling and other industries.
It evenly cuts the material into equal size. The output size is 3-8mm. The low speed won’t lead to overheating and will expand the service life itself.

The system works with Hopper Dryer and sets beside the injection machine to collect the degraded material and scraps produced while injection molding. The regrinding is then conveyed by the blower to the mixing chamber with virgin material proportionally and melt in the plastic-melting chamber. Therefore, the waste materials are reclaimed right before their characteristics change so as to keep the quality, low waste and production cost.

Features:
•Low speed operation, low level of noise low power consumption.
•Installed with a high quality gear motor. The machine’s function is stable, long life-span, the transmission torque is large.
•Special design of the crushing blade let the crushed bits are in even size and minimized the dust generated during operation.
•Blade is made of imported material, high efficiency in operation.
•Motor is installed with overload protective device, connected to the power switch to ensure the machine and controller’s safety.
•Equipped with the auto-loading system to make sure the crushed bits are not be polluted, decrease workload, and increase efficiency.
•The contour of the PNLC-2530, 3030, 3040 is artistic, a strong structure, easy to install, easy and quick maintenance.
•The base is installed with wheels, enable to move around.
•CE safety standards

Video