Industrial Wire Copper Cable Shredder Recycling Machine Application Areas:
Industrial Wire Copper Cable Shredder Recycling Machine is used to recycle harness wire, communication wire, installation wire, power cables with copper or aluminum conductors, copper wire, ACSR-wire, mixed household wire,waste communication wire, wire and cable, automobile wire, computer wire, telephone wire, USB data wire, household appliance wire, and other wires.

Industrial Wire Copper Cable Shredder Recycling Machine Description:
The PNDS Industrial Wire Copper Cable Shredder Recycling Machine uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small size. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head is consists of basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on a single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reducing of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.

Single Shaft Shredder ‘V’ shaped blade:

Working principle:
The motor drives the shaft to make knife rotates at high speed, the material is put to between the knife shaft and fixed knife, the materials are shredder, the qualified size will discharge from the screen mesh, the oversize material will be sent back for re shredding. The final product size can be adjusted by changing the final product size.

 

Industrial Wire Copper Cable Shredder Recycling Machine Components:

Pusher System Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components.	Heat treated rotor knives Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design with staggered cutter positioning	Wear Resistant Tungsten surface coating for abrasive applications
Easy operation Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation	Screen Unit Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance.
PLC control Making it easier for fault diagnosis and maintenance	Hydraulic Station The pressure and rate of flow can be adjusted according to different materials.

Technical Features:
1. The wire copper cable shredder with a big feeding mouth, it can put the big plastic or rubber product freely.
2. The rotary and cutting blade with edge of special design, it can get very high efficiency and high capacity.
3. The wire copper cable shredder is controlled by PLC system; the blade can rotate in opposite direction and close automatically if something unexpected happens; with very high safety service.
4. The wire copper cable shredder runs slowly with low noise and less dusty.
5. The blade material with special alloy steel made, with long life.
6. All the machinery and electrical devices are protected in accordance with the European CE standard.

Related equipment:

Model	PNDS-600A	PNDS-800A	PNDS-1000A	PNDS-1200A	PNDS-1500A
Dimension L*W*H(mm)	2455×1478×1700	2825×1747×1875	2825×2004×1875	2825×2564×1875	2825×2964×1935
Cutting Chamber C/D(mm)	1200×600	1410×800	1410×1000	1410×1200	1410×1500
Main Power（kw)	15-22	30-45	37-55	55-90	75-132
Hydraulic Power(kw)	2,2	3	4	5.5	5.5
Shredding Diameter(mm)	320	400	400	400	480
Shredding Rotor Length(mm)	600	800	1000	1200	1500
Rotating&Fixing Blades QTY(psc)	32+2×2	38+2×2	58+2×2	95+2×3	110+2×3
End Plastic Scraps Size(mm)	30-50	30-50	30-50	30-50	30-50

Video