What is protective suit?
Medical protective suit, also known as medical protective suit, is the work attire of medical staff, that is, protective suit for medical workers. It is mainly used to isolate germs, harmful ultrafine dust, acid solutions, salt solutions, and corrosive chemicals to keep the environment clean.
Features and uses of medical protective suit: (1) Ordinary PP non-woven protective suit
It is made of PP spunbond non-woven fabric, which is characterized by breathable, dustproof, non-waterproof, good tensile strength, and the difference between the front and the back is not obvious. PP spunbond non-woven fabric is used for ordinary isolation suits, low-grade isolation suits and patient suits.
(2) Covered non-woven protective suit
The fabric is coated non-woven fabric, which is characterized by airtight, waterproof, good bacteria isolation effect, the obvious distinction between front and back, non-woven fabric on the body contacting side, no allergies, and good hand feeling. There is a layer of plastic film on the outside to prevent liquid leakage, which is used in occasions with pollution and viruses. The main use of the infectious ward of the hospital is the film-coated non-woven protective suit.
(3) SMS non-woven protective suit
The three-layer composite non-woven fabric, with a waterproof anti-bacterial layer in the middle, and the sesame dot SMS non-woven fabric on the outer layer. SMS non-woven fabrics are used for surgical gowns, surgical hole towels, isolation gowns, test gowns, operating suits, non-surgical masks, and visitor gowns.
(4) Breathable film non-woven protective suit
It is made of PP polypropylene and covered with PE breathable film, so it has strong air permeability and better anti-permeability. It has high impact resistance while resisting a variety of organic solvents, acid and alkali corrosion. Strong mechanical properties, soft and comfortable texture. Non-combustion, non-toxic, non-irritating, harmless to the skin. It is bacteria-resistant, waterproof, slightly breathable, and soft in texture. It is medical protective suit. Its characteristic is that the human body’s sweat can radiate outward, but the harmful gas and moisture outside can’t invade. In addition, the breathable non-woven fabric is also used in surgical gowns, surgical drapes and isolation gowns.
Why recycle protective suits?
A lot of medical resources are consumed every day, among which medical protective suit is an indispensable material, and a doctor needs to use three sets a day. When the epidemic is severe, a city will consume 100,000 sets a day. Disposable protective suit is discarded after use, without disinfection or washing. It is easy to use and can avoid cross-infection. However, disposable materials degrade slowly and easily cause environmental pollution. Usually, surgical gowns and isolation gowns with high protection requirements are mostly used. Types of. protective suit, as an item in direct contact with patients, carries a large number of germs. If the waste protective suit is not handled properly, it is very easy to cause secondary pollution and become another serious source of infection.
How to recycling protective suits?
Recycling should be based on whether the protective suit has been used: 01. If the used protective suit contains bacteria, etc., this kind of waste protective suit can be shredded into small pieces by double single shaft shredder, and then sterilizer by high temperature and high pressure. they are made into plastic particles through an agglomerator plastic pelletizer machine.02. If it is the corner waste in the production of protective suit, it does not need to be sterilized. After the double single shaft shredder, the pellets are made into an agglomerator plastic pelletizer machine. 03. In a more economical recycling program, if the output requirement is not high, the agglomerator plastic pelletizer machine can be used directly.
Main equipment:
Double single shaft shredder
Agglomerator plastic pelletizer machine
WANROOETECH professional recycling solution provider
WANROOETECH has focused on recycling for 20 years. We have an excellent technical team, sales team, and after-sales service. We can provide the most suitable recycling program according to your requirements. Contact us today and we will recommend you an optimal model to fit your need.
You want more information, quotation, please leave us a message! when sending the inquiry, please describe your parameters or technical requirements (such as processing materials, output size, capacity, etc.)
Leave a Reply