Homemade Copper Wire Granulator Cable Granulator Introduction:

Homemade copper wire granulator cable granulator is an integrated processing machine for recycling automotive wires, communication cables and other types of miscellaneous wires and cables. The diameter of scrap cables it can process is 0.5- 20mm. Homemade copper wire granulator cable granulator is suitable for homemade and small-scale recycling businesses.

Homemade Copper Wire Granulator Cable Granulator Features:

1. Integrated structure, small dimensions, easy to move, saving space.
2. Low power consumption, and stable performance.
3. Minimum copper recycling rate can reach 99%.
4. No water is needed, no dust, no environmental pollution.
5. Controlled by the electricity control panel, highly automatic.
6. The voltage can be customized as per your requirements.

Working Process of Homemade Copper Wire Granulator Cable Granulator:

Scrap wires or cables that are fed into the copper wire granulator machine are chopped by the chopper and become plastic pieces and copper granules. After air and vibration separation, copper granules come out of the front outlet and plastics out of the back outlet. Dust is sent to dust collector via air duct.

Sharp Blades or Blunt Blades:

The cutting blades of a cable granulator are not always good to be sharp. Depending on the types of wires we may need them to be blunt.
When processing air-fine wires and multi-strands wires, fixed blades and rotating blades must be very sharp, so that copper wires can be cut off, and copper granules will have high purity.
When processing single-strand and single-core wires, fixed blades must be sharp while rotating blades shall be a little blunt. Then the spacing between rotating blades and fixed blades will just hold wires without touching the cores. In this case, the generation of plastic-clad copper granules will be avoided effectively.