Computer and printer ABS cover recycling

Time:2024-04-15

ABS Cover Instructions for Computers and Printers

ABS covers for computers and printers are usually made of ABS plastic, a thermoplastic resin with good overall properties.ABS plastic has high impact strength and surface hardness in a wide temperature range, high thermal deformation temperature, good dimensional stability, and excellent electrical insulation properties, and is almost unaffected by temperature, humidity and frequency.

Computer and printer ABS cover recycling value

First, ABS cover recycling can effectively reduce the demand for new raw materials, thereby reducing the exploitation and consumption of natural resources. Secondly, ABS cover recycling has positive significance for environmental protection, and can effectively reduce the amount of garbage generated and reduce the pressure on the environment. In addition, ABS cover recycling also has high economic benefits. After recycling ABS covers and processing, they can be used again to produce new computers, printers and other products, thus reducing production costs.

 

Recycling Process

Shredding: First, the collected used computer and printer ABS covers need to be shredded.Crushing is an important link in the recycling process. It can break large and irregular ABS covers into small pieces or fragments to facilitate subsequent handling and processing.This step is usually carried out using a specialized crusher, which uses mechanical force to break the ABS cover into particles or fragments of appropriate size.

Cleaning: After the crushing is completed, cleaning is next.The purpose of cleaning is to remove dirt, grease and other impurities on the surface of ABS fragments to ensure the quality of recycled plastic.Simple cleaning usually involves rinsing the debris with water to remove dust and residue from the surface.This step can be performed manually or using cleaning equipment. The cleaning method and intensity are determined according to the degree and quantity of contamination of ABS fragments.

Granulation: After cleaning is completed, the next step is granulation.Granulation is the process of further processing the cleaned ABS fragments into granular form.This step is usually carried out using a granulator, which melts the ABS fragments by heating, then extrudes them into strips or filaments through a die, and then cools and cuts them to finally form granular ABS plastic.The granulated ABS plastic particles have high quality and uniformity and can be directly used for subsequent processing and utilization.

Cleaning and Granulating Video:

Related machinery:

Computer and printer ABS cover recycling

ABS Washing Recycling Machine

Leave a Reply

Your email address will not be published. Required fields are marked *