Plastic film is now widely used in agriculture, food, medicine, chemicals and other fields, bringing great convenience to people’s lives, but the recycling of plastic film has been a major problem in the environmental protection industry, the recycling rate of plastic film is particularly low. Not people do not want to use it, but the lack of reliable and effective equipment to assist. The advent of plastic film shredder machine has largely solved this problem!

Plastic film is a soft material with strong winding properties. It is very difficult to recycle and reuse. If it is to be shredded, traditional fast-knife shredding equipment cannot be used. Traditional shredding equipment tends to jam during the shredding process. Strongly entangled materials must use a professional plastic film shredder machine. Nowadays, double-shaft shredder, double single shaft shredder and single shaft shredder are commonly used to shred plastic film. The following is an introduction to these three types of plastic film shredder machines.

Single-shaft plastic film shredder machine
The single-shaft shredder has excellent overall performance, is outstanding in terms of processing capacity, reliability and maintainability.

The single-shaft shredder can shred plastic waste at high speed with finer final size.

Double single-shaft plastic film shredder machine
Double single-shaft shredder is developed on the basis of single-shaft fine shredder. The machine is designed from the beginning to pursue higher capacity, lower operating costs, faster maintenance and more user-friendly operating experience. Materials can fall naturally into the knife group crushing area through the feed bin without the need of pushing device, which can realize the automatic uniform feed of each chip knife roller.

Double single-shaft shredder can shred all kinds of mixed plastic waste at high speed, with uniform discharge and controllable particle size.

Double shaft plastic film shredder machine
Double shaft plastic film shredder machine has the advantages of high torque, wide application of materials and high efficiency, and is widely used for shredding plastic film. After the plastic film goes down, it can be shredded little by little, and the shredding effect is obvious. When the shredder is overloaded and stuck, it will turn over on its own, then positive rotation, adjust the position of the material, and then continue to positive rotation shredding to ensure safe and reliable production.

The equipment crushes a variety of mixed plastic waste at low speed, with high output and coarse discharge.

Now people’s life and production are inseparable from plastic, and therefore produce large areas of plastic film. Recycling plastic film is a big market. WANROOETECH plastic film shredder machine is a good practical helper for plastic recycling. If you want to know more about the treatment of plastic film, please contact us for more professional information!