Cast Iron Shavings Shredder Metal Shredder Machine Application Areas:
Cast Iron Shavings Shredder Metal Shredder Machine is used to recycle metal scraps, such as metal turning scrap,metal punching scrap, scrap metal cans, beverage cans, beer cans, red bull cans, metal bottles, cans, cola cans, paint buckets, iron buckets scrap tin cans, scrap iron slag, moon cake boxes, steel shavings, scrap aluminum cans, scrapped automobile scrap, waste water tanks, waste radiators, metal drum, metal barrel, tin cans and etc.

Cast Iron Shavings Shredder Metal Shredder Machine Description:
The PNDS Cast Iron Shavings Shredder Metal Shredder Machine uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small size. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper etc. The cutter head is consists of basic shaft and pieces of quadrangle cutter. There are four edges which are easy to change. ‘V’ shaped rotary cutters are fixed on single shaft. The fixed cutter is mounted at an angle in adjacent to rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reducing of noise are ensured by the installation of ‘V’ shape rotor knives. Also the knives are very easy to install and remove.

Single Shaft Shredder ‘V’ shaped blade:

Cast Iron Shavings Shredder Metal Shredder Machine Working principle:
The motor drives the shaft to make knife rotates at high speed, the material is put between the knife shaft and the fixed knife, the materials are shredded, the qualified size will discharge from the screen mesh, the oversize material will be sent back for re-shredding. The final product size can be adjusted by changing the final product size.

Cast Iron Shavings Shredder Metal Shredder Machine Components:

Pusher System Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components.	Heat treated rotor knives Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design with staggered cutter positioning	Wear Resistant Tungsten surface coating for abrasive applications
Easy operation Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation	Screen Unit Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance.
PLC control Making it easier for fault diagnosis and maintenance	Hydraulic Station The pressure and rate of flow can be adjusted according to different materials.

Cast Iron Shavings Shredder Metal Shredder Machine Technical Features:
1. The cast iron shavings shredder with a big feeding mouth, it can put the big plastic or rubber product freely.
2. The rotary and cutting blade with edge of special design, can get very high efficiency and high capacity.
3. The cast iron shavings shredder is controlled by PLC system; the blade can rotate inopposite directions and close automatically if something unexpected happens; with very high safety service.
4. The cast iron shavings shredder runs slowly with low noise and less dust.
5. The blade material with special alloy steel is made, with long life.
6. All shredder and electrical devices are protected in accordance with the European CE standard.

Video